Maintenance-free Building Products
PVC-u Fascias, Soffits and Guttering
Full Replacement
"Full Replacement" requires the timber fascia to be removed and a thicker, load bearing pvc-u fascia board to be fixed to the rafter ends. This is fixed with stainless steel nails with coloured heads to match the fascia being fitted.
The pvc-u fascia has to be thicker to support the weight of the roof tiles
This full replacement method is required if the existing timber fascia is very rotten.
Due to this method being more time consuming and a thicker material being used the cost is higher.
We use an "Eaves Protection system" on all our projects, follow the link on the home page for more information.
The picture on the left shows the tiles removed ready for the fascia board to be taken off.
The picture on the right shows the rafter ends
once the
existing fascia and soffit boards have been removed.
The picture on the left shows the tiles back in
position
the rigid eaves protection can be seen covering any
gap
between the tiles and the gutter, this makes sure that
no
rain water can can get to the rafter ends and also helps to
keep the fascias
cleaner.
The finished look.
Unit 46, Ridgeway, Hixon,
Staffs.
Phone:- 01889 270174
Copyright 1993 © mbp.co.uk